Formato régua - 1164mm comprimento X 194mm largura X 10.5mm de espessura.
Formato placas - 388mm X 388mm largura X 10.5mm de espessura.
Formato manta - 1400mm comprimento X 1200mm largura X 20mm de espessura.
| Level of use | Class | Symbol |
| Domestic Heavy | 23 |  |
| Commercial Moderate | 31 |  |
| Characteristic | Symbol | Requirement | Test method |
|
Length and width measured at surface layer |
|
1164 x 194 mm 388 x 388 mm |
EN 427 |
| Overall thickness |  |
10,5 mm + 0,20mm | EN 428 |
| Thickness of surface layer |  |
2,5 mm + 0,20mm | EN 428 |
| Density of surface layer |  |
> 850 Kg/m3 | EN 672 |
| Squareness Straightness measured at surface layer |
< 0,3 mm < 0,2 mm |
EN 427 | |
|
Flatness of the panel Length - Concave/Convex Width – Concave/Convex |
< 0,1% / < 0,5% < 0,05% / < 0,1% |
EN 14085 Annex A |
|
|
Openings between panels Average Individual values |
< 0,10 mm < 0,15 mm |
EN 14085 Annex B |
|
|
Height difference between panels Average Individual values |
< 0,15 mm < 0,20 mm |
EN 14085 Annex B |
|
|
Dimensional variation caused by changes in atmospheric humidity |
 |
< 0,15 % |
EN 669 Annex C |
| Residual indentation |  |
< 0,25 mm | EN 433 |
| Characteristic | Symbol | Requirement | Test method |
| Mass per unit area |
|
Average 8.800 g/m2 | EN 430 |
| Locking strength |  |
Flong > 5 kN / m Fshort > 8 kN/ m | Internal |
| Abrasion resistance |  |
Average 6.000 revolutions to initial point (abrasion wheels CS17; 1Kg weight per wheel; cleaning 10 revolutions each 1000 turns) |
Internal |
| Impact resistance (small ball) |
 |
> 90 N | EN 438-2 |
| Formaldehyde emission Straightness measured at surface layer |
 |
Formaldehyde Class E1 Release < 3,5 mg/m2h |
EN 14041 EN 717-2 |
| Reaction to fire |  |
Class Dfl – S1 |
EN 14041 EN 13501-1 |
| Slip resistance |  |
Technical class DS. Dynamic coefficient of friction > 0,30 |
EN 14041 EN 13893 |
| Impact noise reduction |  |
deltaLw = 17 dB | EN ISO 140-8 |
| Thermal resistance |  |
0,099 m2 .K/W |
EN 14041 EN 12664 |
| Electrical behaviour |  |
Antistatic floor covering The body voltage shall not exceed 2,0 kV |
EN 14041 EN 1815 |
 |
Industry leading patented UNICLIC® locking system and GFIX join performance. |
 |
High quality two-component waterborne PU finish, with very high wear and impact resistance with a natural look-and-feel. |
 |
Low swelling and moisture resistant High Density Fibreboard. |
 |
Micro-bevelled edge aesthetic enhancement. |
 |
Embedded antibacterial and fungus protection using Microban® antibacterial technology. |
 |
Indoor air quality certification for lowemitting interior building materials. |
 |
Formaldehyde-free agglomeration technology. |
 |
Certification for safety and energy-saving performance. |
| EN 427 | Resilient floor coverings – Determination of the side length and the squareness and straightness of tiles. |
| EN 428 | Resilient floor coverings – Determination of the overall thickness. |
| EN 430 | Resilient floor coverings – Determination of mass per unit area. |
| EN 433 | Resilient floor coverings – Determination of residual indentation after static loading. |
| EN 438-2 | Decorative high-pressure laminates (HPL) sheets based on the thermosetting resins. Determination of properties. |
| EN 669 | Resilient floor coverings – Determination of dimensional stability of leather tiles caused by changes in atmospheric humidity. |
| EN 672 | Resilient floor coverings – Determination of apparent density of agglomerated cork. |
| EN 685 | Resilient floor coverings – Classification. |
| EN 14085 | Resilient floor coverings – Specification for panels for loose laying. |
| EN 14041 | Resilient, textile and laminate floor coverings – Essential characteristics. |
